Chapter 6 Cajun Campus CLI – Layer 2
Show port trap Command
Use the show port trap command to display information on SNMP generic link up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<mod_num>[/<port_num>]]
Example:
Port 1/1 up/down trap is disabled
Show port channel Command
Use the show port channel command to display Link Agreggation Group (LAG) information for a specific module or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]] Example:
show port channel 1 |
| |
Port | Channel Status | Channel Name |
1/1 | off |
|
1/2 | off |
|
1/3 | on | server1 |
1/4 | on | server1 |
1/13 | off |
|
1/14 | off |
|
1/15 | off |
|
1/16 | off |
|
1/5 | off |
|
etc... |
|
|
Note: Ports are listed and grouped according to the possible LAG membership.
46 | Cajun P332MF User’s Guide |
