Chapter 6 Cajun Campus CLI – Layer 2

The syntax for this command is:

copy stack-config tftp <filename> <ip>

filename

file name (full path)

ip

The ip address of the host

Example:

Cajun_P330-N# copy stack-config tftp c:\conf.cfg 149.49.36.200

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'upload status' command

********************************************************************

*If you are currently running the P330 Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

Copy module-config tftp Command

Use the copy module-config tftp command to upload the module-level parameters from the current NVRAM running configuration into a file via TFTP.

The syntax for this command is:

copy module-config tftp <filename> <ip> <mod_num>

filename

file name (full path)

ip

The ip address of the host

Example:

Cajun_P330-N# copy module-config tftp c:\p332mf\switch1.cfg 192.168.49.10 5

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show tftp upload status' command

92

Cajun P332MF User’s Guide

Page 106
Image 106
Lucent Technologies P332MF manual Copy stack-config tftp filename ip, Copy module-config tftp Command