Chapter 6 Cajun Campus CLI – Layer 2

Set internal buffering Command

The set internal buffering command allows you to set the size (either Maximum or Minimum) of the Receive (Rx) buffer allocated to each port of the specified module. This command is meaningless when any port of the module is operating with flow control ON.

The syntax for this command is:

set internal buffering <mod_num> {maxmedmin}

max

Sets the internal receive buffer to its maximum size.

med

Sets the internal receive buffer capacity dynamically

min

Sets the internal receive buffer to its minimum size (this is the

 

Default).

Example:

Cajun_P330-N> set internal buffering 1 max

Done.

Set intermodule port redundancy Command

Use the set intermodule port redundancy command to define or delete the stack’s unique intermodule redundancy scheme. The defined scheme can be enabled or disabled using the reversed set port spantree enable/disable

command.

The syntax for this command is:

set intermodule port redundancy <module/prim-port> <module/ second-port> { on off } [<name>]}

<module/prim-port>

the primary port number

<module/second-port>

the secondary port number

{ on off }

set (on) or clear(off) the intermodule redundancy

[<name>]

the name of the fast redundancy (default is 'fast')

Example:

Cajun_P330-N> set intermodule port redundancy 1/7 2/12 on backbone

backbone: port 2/12 is intermodule redundant to port 1/7

84

Cajun P332MF User’s Guide

Page 98
Image 98
Lucent Technologies P332MF manual Set internal buffering Command, Set internal buffering modnum maxmedmin