Lucent Technologies P332MF manual Set logout Command, Set logout timeout

	Chapter 6	Cajun Campus CLI – Layer 2
• set intelligent-	Sets the aging time for router ports		Page 86
multicast router-
port-pruning time
• set intelligent-	Sets the time delay before a filter is		Page 86
multicast group-	applied to a specific group
filtering-delay
time
• set secure mac	Adds a unicast MAC addres into the		Page 86
	CAM table of a secured port
• set security mode	Enables or disables the stack’s MAC		Page 87
	security
• set port security	Enables MAC security on a range of		Page 87
	ports

Set logout Command

The set logout command is used to set the number of minutes until the system automatically disconnects an idle session.

The syntax for this command is:

set logout <timeout>

timeout	Number of minutes (0 to 999) until the system automatically
	disconnects an idle session. Setting the value to 0 disables the
	automatic disconnection of idle sessions (default is 15
	minutes).

Example:

To set the number of minutes until the system disconnects an idle session automatically:

Cajun_P330-N# set logout 20

Sessions will be automatically logged out after 20 minutes of idle time.

To disable the automatic disconnection of idle sessions:

Cajun_P330-N# set logout 0

Sessions will not be automatically logged out.

Cajun P332MF User’s Guide 69