Running the Embedded Manager

Note: You should assign an IP address to the switch before beginning this procedure.

1Open your browser.

2Enter the url of the switch in the format http://aaa.bbb.ccc.ddd where aaa.bbb.ccc.ddd is the IP address of the switch.

Note: The user name is “root”

The default password for read-write access is “root”.

Note: The Web management passwords are the same as those of the CLI. If you change the passwords of the CLI then use those passwords for Web management as well.

The welcome page is displayed:

Figure A.1 The Welcome Page

100

Cajun P332MF User’s Guide

Page 114
Image 114
Lucent Technologies P332MF manual Running the Embedded Manager, Figure A.1 The Welcome