Chapter 6 Cajun Campus CLI – Layer 2
Example:
To enable SNMP ConfigChange traps to a specific manager:
To enable all traps to a specific manager:
All SNMP traps enabled.
To disable SNMP config traps to a specific manager:
To add an entry in the SNMP trap receiver table with default:
SNMP trap receiver added.
Set snmp trap auth Command
Use the set snmp trap auth commands to enable/disable the sending of SNMP traps upon SNMP authentication failure.
The syntax for this command is:
set snmp trap {enabledisable} auth
Example:
Authentication trap enabled
Set snmp retries Command
Use the set snmp retries command to set the number of retries initiated by the Device Manager application when it tries to send SNMP messages to the device.
The syntax for this command is:
set snmp retries <number>
72 | Cajun P332MF User’s Guide |
