Chapter 4 Installation and Setup

7At the prompt, type set ip route <dest> <gateway> and replace <dest> and <gateway> with the destination and gateway IP addresses.

8Press Enter to save the destination and gateway IP addresses.

Note: If there are any errors, the new configuration settings will not be saved. To save the new configuration settings, you must correct the errors by repeating the command.

9At the prompt, type exit to exit the CLI session.

10Insert the Cajun P330 stack into your network.

Cajun P332MF User’s Guide

27

Page 41
Image 41
Lucent Technologies P332MF manual Installation and Setup