Lucent Technologies P332MF manual Laser Classification

Laser Classification

CLASS 1

LASER PRODUCT

Note: Class 1 lasers are inherently safe under reasonably foreseeable conditions of operation.

Caution: The use of optical instruments with this product will increase eye hazard.

Usage Restriction

When a GBIC transceiver is inserted into the X330G2 Expansion sub-module but is not in use, then the Tx and Rx ports should be protected with an optical connector or a dust plug.

Lucent Approved GBIC Transceivers

Caution: All Lucent approved GBICs are 5V. Do not insert a 3.3V GBIC.

Lucent supplies the following two GBIC transceivers for the Cajun P330 X330G2 Expansion Sub-modules. You can order these directly from your local Lucent representative using the PEC or COM Codes:

Type	Description	PEC Code	COM Code
GBIC SX	Multimode Fiber	4705-122	108659228
Transceiver	1000BaseSx (550 m)
GBIC LX	Single-mode Fiber	4705-121	108659210
Transceiver	1000BaseLx (10 km)

In addition, Lucent has tested and approved a number of GBIC transceivers from other manufacturers for use with the Cajun X330G2 Expansion sub-module. An

up-to-date list can be found in in Lucent Networks’ World-Wide Web site at the following address: http://www.lucentnetworks.com/

Click on the “Supported Devices” icon.

Cajun P332MF User’s Guide 111