Chapter 6 Cajun Campus CLI – Layer 2
Set Commands Summary Table
Following is a Table of the Privileged Level set commands.
• set logout | Set the number of minutes before an | Page 69 | |
|
| inactive CLI session automatically logs |
|
|
| out |
|
• set timezone | Set the timezone for the system | Page 70 | |
• set ntp server | Set the NTP server address | Page 70 | |
• set ip route | Add IP addresses to the IP routing table | Page 70 | |
• set snmp | trap | Set the SNMP trap of the system or add/ | Page 71 |
|
| delete an entry into/from the SNMP |
|
|
| trap receiver table |
|
• set snmp | trap auth | Enable/Disable the SNMP | Page 72 |
|
| authentication trap |
|
• set snmp | retries | Set the number of SNMP retries | Page 72 |
• set snmp | timeout | Set the SNMP timeout | Page 73 |
• set system | Set the system location | Page 73 | |
location |
|
|
|
• set system name | Set the system name | Page 73 | |
• set system contact | Set the system contact person | Page 73 | |
• set interface | Configure the management interface of | Page 74 | |
|
| the device |
|
• set port | level | Set the priority level of a port | Page 74 |
• set port |
| Set the autonegotiation mode of a port | Page 75 |
negotiation |
|
| |
• set port | enable | Administratively enable a port | Page 75 |
• set port | disable | Administratively disable a port | Page 75 |
• set port | speed | Set the speed for a 10/100 port | Page 76 |
• set port | duplex | Set the duplex mode of a port | Page 76 |
• set port | name | Assign a name to a port | Page 76 |
• set port | trap | Enable/Disable the SNMP up/down link | Page 77 |
|
| traps sent for port |
|
Cajun P332MF User’s Guide | 67 |
