Lucent Technologies P332MF manual Show port Command, CajunP330-N show port 3/4

Chapter 6 Cajun Campus CLI – Layer 2

Show port Command

Use the show port command to display port status.

The syntax for this command is:

show port [<mod_num>[/<port_num>]]

mod_num	(Optional) Number of the module. If you do not specify a
	number, the ports on all modules are shown.
port_num	(Optional) Number of the port on the module. If you do not
	specify a number, all the ports on the module are shown.
	You can also specify a range of ports separated by a dash, e.g.
	5-13 for ports 5 to 13.

Example:

To display the status for port 4 on module 3:

Cajun_P330-N> show port 3/4

Port NameStatus Vlan Level Neg Dup. Spd. Type

------ --------------- --------- ---- ------ ------- ---- ---- -------------

3/4 John	connected 1	normal enable half 10M 10/100Base-Tx
Show Port Output Fields
Field	Description
Port	Module and port number
Name	The name you assigned to the port
Status	Status of the port (connected, faulty, disabled)
VLAN	VLAN ID of the port
Level	Priority level of the port (normal or high)
Neg	The autonegotiation status of the port (enable, disable)
Duplex	Duplex setting for the port (fdx, hdx)
Speed	Speed setting for the port (10, 100).
Type	Port type, for example, 10BaseT, 10BaseFL, 100BaseTX,
	100BaseFX MM, 100BaseFX SM, 10/100BaseTX

Cajun P332MF User’s Guide 45