Chapter 6 Cajun Campus CLI – Layer 2

Get time Command

This command retrieves the time from the network.

The syntax for this command is:

get time

Example:

Cajun_P330-N# get time

Time is already being acquired from network!

Note: You must reset the switch after performing the download.

Reset Command

Use the reset command to restart the system or an individual module. If no module number is defined or the module number of the Master is defined, the command resets the entire system. If the module number is defined, the command resets the specified module only.

The syntax for this command is:

reset [<mod_num>]

Example:

To reset the Master agent and force the entire system to reset:

Cajun_P330-N# reset

This command will force a switch-over to the master module and disconnect your telnet session.

Do you want to continue (y/n) [n]? y Connection closed by foreign host. host%

To reset module 4:

Cajun_P330-N# reset 4

This command will reset module 4 and may disconnect your telnet session.

Do you want to continue (y/n) [n]? y Resetting module 4...

88

Cajun P332MF User’s Guide

Page 102
Image 102
Lucent Technologies P332MF manual Get time Command, Reset Command