Chapter 6 Cajun Campus CLI – Layer 2
Monitors ifEntry.1.1026 every 30 seconds Requested # of time intervals, ie buckets, is 20 Granted # of time intervals, ie buckets, is 20 Sample # 1 began measuring at 2:53:9
Received 62545 octets, 642 packets,
391 broadcast and 145 multicast packets,
0 undersize and 0 oversize packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
#of dropped packet events (due to a lack of resources): 0 Network utilization is estimated at 0
Show rmon alarm Command
This command shows the parameters set for a specific alarm entry that was set using the rmon alarm command on Page 90 or using the Cajun P330 Device Manager.
The syntax for this command is:
show rmon alarm [<Alarm Index>]
Example:
alarm 1026 is active, owned by amir Monitors ifEntry.1.1026 every 60 seconds Taking delta samples, last value was 1712
Rising threshold is 10000, assigned to event # 1054 Falling threshold is 10, assigned to event # 1054 On startup enable rising or_falling alarms
Show rmon event Command
This command shows the parameters of an Event entry defined by the rmon event command on Page 91 or using the Cajun P330 Device Manager.
The syntax for this command is:
show rmon event [<Event Index>]
Example:
event
56 | Cajun P332MF User’s Guide |
