Lucent Technologies P332MF manual Rmon event Command, Copy stack-config tftp Command

Chapter 6 Cajun Campus CLI – Layer 2

owner Owner name string

Example:

Cajun_P330-N# rmon alarm 1026 1.3.6.1.2.1.16.1.1.1.5.1026 60 delta rising-threshold 10000 1054 falling-threshold 10 1054 risingOrFalling amir

alarm 1026 was created successfull

Rmon event Command

Use the rmon event command to create an RMON event entry.

The syntax for this command is:

rmon event <Event Number> <type> description <description> owner <owner>

event number	This is the event index number of this entry.
type	The type of the event. The possible parameters are:
	trap, log, logAndTrap, none.
description	A user description of this event
owner	Owner name string

Example:

Cajun_P330-N# rmon event 1054 logAndTrap description "event for monitoring amir's computer" owner amir

event 1054 was created successfully

Copy stack-config tftp Command

Use the copy stack-config tftp command to upload the stack-level parameters from the current NVRAM running configuration into a file via TFTP.

Note: Create the file into which you wish to upload the stack-level parameters prior to executing this command.

Cajun P332MF User’s Guide 91