
Chapter 6 Cajun Campus CLI – Layer 2
Privileged Level Commands
Following is a table of the Privileged Level commands. This level includes all the commands from the User Level described above (see the User Level Commands Section for a description of these common commands).
• no hostname | Return the prompt to its default | Page 63 |
• no rmon history | Deletes an existing history entry | Page 63 |
• no rmon alarm | Deletes an existing alarm entry | Page 63 |
• no rmon event | Deletes an existing event entry | Page 63 |
• hostname | Displays or sets a new prompt | Page 64 |
• clear1 | Clears current settings (group of | Page 64 |
| commands) |
|
• set2 | Set the module parameters (group of | Page 67 |
| commands) |
|
• sync time | Synchronizes the time between modules | Page 85 |
• get time | Gets the time from the time server | Page 88 |
• reset | Restarts the system or a module | Page 88 |
• nvram | Initialize the NVRAM to its factory defaults | Page 89 |
initialize |
|
|
• configure | Currently not used in the Layer 2 CLI. | Page 89 |
• tech | Enter Technician level – Lucent personnel | – |
| only |
|
• rmon history | Creates a history entry | Page 89 |
• rmon alarm | Creates an alarm entry | Page 90 |
• rmon event | Creates an event entry | Page 91 |
• copy stack- | Upload stack configuration to a file (using | Page 91 |
config tftp | tftp). The file must exist before you Upload. |
|
• copy module- | Upload module configuration to a file (using | Page 92 |
config tftp | tftp). The file must exist before you Upload. |
|
• copy tftp | Download a stack configuration file (using | Page 93 |
TFTP) into the device |
|
62 | Cajun P332MF User’s Guide |