Mitel 3000
Administrator’s Manual
OEM DEVICES
The mounting of the certified unit in the final assembly must be made so that the certified unit is isolated
from exposure to any hazardous voltages within the assembly. Adequate separation and restraint of cables
and cords must be provided.
The circuitry from the certified unit to the telephone line must be provided in wiring that carries no other
circuitry unless specifically allowed by the rules (such as PC and PR leads). PC board traces carrying tip
and ring leads shall have sufficient spacing to avoid surge breakdown.
If the certified device is enclosed in an assembly, and is not readily accessible, the certification label must
be placed on the exterior of the cabinet for each type of certified device contained therein.
The final assembler must provide all applicable material (contained in this section) with the final
equipment.
A modular plug or jack must be provided which complies with Part 68, Subpart F requirements for
dimensions, tolerances and metallic plating.

Automatic Dialers

WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call.
2. Perform such activities in the off-peak hours, such as early morning or late evenings.

Toll Restriction and Least Cost Routing Equipment

The software contained in Mitel 3000 to allow user access to the network must be upgraded to recognize
newly established network area codes and exchange codes as they are placed into service.
Failure to upgrade the premises systems or peripheral equipment to recognize the new codes as they are
established will restrict the customer and the customer's employees from gaining access to the network and
to these codes.

Equipment with Direct Inward Dialling (DID)

ALLOWING THIS EQUIPMENT TO BE OPERATED IN SUCH A MANNER AS TO NOT PROVIDE
FOR PROPER ANSWER SUPERVISION IS A VIOLATION OF PART 68 OF THE FCC'S RULES
PROPER ANSWER SUPERVISION IS WHEN:
A. This equipment returns answer supervision to the PSTN when DID calls are:
• Answered by the called station
• Answered by the attendant
13