Mitel 3000
Administrator’s Manual
The following table lists the available “Extensions” options, with their defaults, if applicable.
Feature Default Notes
Name programming None programmed See page 93.
Restriction classes
• Day class-of-service
• Night class-of-service
All extensions in Class 1. See page 95.
Tone Protect Extensions do not accept tone See page 91.
Page Protection Extensions accept paging See page 83.
Open Door Restriction All extensions enabled See page 97.
Individual Caller ID List No stores programmed See page 80.
Sys. Speed Dial. Override No override programmed See page 95.
Voice Mail Boxes
• Standard Voice Boxes
• Information Only VB
Not programmed See page 60.
Extension disconnect All extensions connected See page 104.
VM Capacity % Used Not applicable See page 70.
No Call Logging Not programmed See page 99.
External Forwarding
• No Trunk-to-Trunk calls
• All Calls
• External calls only
All calls See page 43.
Examine Passwords
• Extension lock password
• Voice Mail password
• System voice mailbox
Default 123
Default 1111
Default 1111
See page 104.
Restrict Use Of PA All extensions can make
announcements
See page 83.
Port Swapping Not programmed See page 106.
Hot Line Not programmed See page 93.
Manager/Assistant Not programmed See page 83.
Tele-secretary Not programmed See page 133.
20 Hz ringing 50 Hz ringing See page 107.
Reverse Cadence Not set See page 107.
Keypad Confirmation All set See page 107.
Flexible Numbering Not set See page 108.
DSS extensions Extension 20 –27 set. All
others not set
See page 29.
Call Recording Not set See page 65.
Send Specific DID All Extensions On See page 108
Remote Notification Off in all extensions
Pager Dial String delay set as
Short Delay
See page 66
Barge-In
• Allowed to Barge-In
• Protected from Barge-In
• Barge in Tone
Not set See Page 75.
Paired Extensions Not Set See Page 76.
141