Mitel 3000
Administrator’s Manual
From a standard analog telephone, “Barge-In” is activated by dialing the code 709 followed by the
extension number.
To Program extensions allowed to barge-in
In default no extensions are programmed to activate “Barge-In”.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Press the Scroll Down key () until “Barge-In” is displayed.
• Select “Barge-In Extensions”.
• Select the extensions that are to be allowed to barge-in. The extensions you select will have a “♦”
displayed beside them.
The default is that no extensions are allowed to barge-in.
To Program extensions protected from “Barge-In”
In default no extensions are programmed to activate “Barge-In”.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Press the Scroll Down key () until “Barge-In” is displayed.
• Select “Barge-In Protection”.
• Select the extensions that are to be protected from barge-in. The extensions you select will have a “♦”
displayed beside them.
The default is that no extensions are protected.
To Program “Barge-In” with or without tone
In default no extensions are programmed to activate “Barge-In”.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Press the Scroll Down key () until “Barge-In” is displayed.
• Select “Barge-In Tone”.
• Select Barge-In tone on or off. The selection is indicated with a “♦”.
In default tone is provided when barge in is activated. This is a single burst, which lasts for about a half a
second.
Paired Extensions An extension can be paired with another extension. The full functionality of the master extension including
extension number and all programmed features, including voicemail, can be transferred to the alternate
extension, providing the user with all their normal telephony facilities at two different locations.
1. From the Programming extension, press the PROGRAM key.
2. Press the Scroll Down key () until “System Programming” is displayed.
3. Select “System Programming”.
4. Enter the System Programming Password and select “Extensions”.
5. Press the Scroll Down key () until “Paired Extensions” is displayed.
6. Select the master extension
7. Select the Alternate extension .The selection is indicated with a “♦”.
In default no extensions are paired. From a standard telephone the code is 702.
76