Enable personal softkey programming
When you enable personal softkey programming, the default softkeys programmed by the 3300 ICP (when it the 5235 IP Phone is idle) are no longer displayed and are not available.
To enable softkey programming:
1.Open the Settings shutter.
2.Press the scroll buttons ( 
) until the Personal Softkeys setting is listed.
3.Press the Personal Softkeys setting.
4.Press the checkbox for Personal Softkey in effect.
5.Press Save.
Program Message Waiting Indicator
You can program a Message Waiting Indicator (MWI) to a Programmable key so that when a message is left on another phone, you are notified by a flashing key.
1.Open the Setting shutter.
2.Press the scroll buttons ( 
) until the My Phone Setup setting is listed.
3.Press the My Phone Setup setting.
4.Press the key you wish to program. A programming window with three tabs displays.
5.If the Features tab is not selected, press the Features tab.
6.Use the scroll buttons ( 
) to scroll through the features list until Message Waiting Indicator is listed.
7.Press Message Waiting Indicator.
8.Press the Number field.
9.In the
number (you will be notified of messages on this phone number) and click Done.
10.Click Save.
