4 SETTINGS AND PROCEDURES PRIOR TO OPERATION

4.6 Settings with the Utility Package (GX Configurator-SC)

MELSEC-Q

The settings defined with GX Configurator-SC for operation of the Q series C24 are described in Chapter 8.

The following concerns the data set from GX Configurator-SC.

1)Data set in the Q series C24 for the use of specific functions

2)Data set in the PLC CPU to communicate information between the Q series C24 and the PLC CPU of the mounting station.

This section explains the "Auto refresh settings" of the data mentioned in 2) above.

[Setting purpose]

The auto refresh settings are defined to automatically store the error and status information stored in the buffer memory of the Q series C24 in devices designated by the PLC CPU.

By this setting, the users can see the module error and status information without accessing the Q series C24.

[Setup procedure]

[GX Developer] [Tools] [Intelligent function utility] [Start] "Intelligent function module parameter setting module select" Auto refresh .

For display screen, see Section 8.3.

[Setting screen]

4 - 22

4 - 22