9DEDICATED INSTRUCTIONS

Function

MELSEC-Q

(1)Data stored in the device designated in (S2) and succeeding devices are sent according to the control data of the device designated in (S1) and succeeding devices, via the non procedure protocol of the module specified in Un.

QCPU

Q series C24

b15 to b0

(S2) + 0

+ 1 Channel 1

+ 2

Channel 2

Channel to be

used is set by

the control data. Send

Send

(2)The following instructions cannot be executed on a channel on which an OUTPUT instruction is being executed.

Other OUTPUT instructions

PRR instructions

If an attempt is made during execution of an OUTPUT instruction to execute one of the instructions above, the second instruction will not be executed until the execution of the OUTPUT instruction is completed.

(3)Whether an OUTPUT instruction was completed normally or abnormally can be checked by the completion device ((D)) or status display device at completion ((D)+1).

(a)Completion device: Turns on at the END processing of the scan where the OUTPUT instruction is completed, and turns off at the next END processing.

(b) Status display device

 

at completion

: Turns on and off depending on the completion status

 

of the OUTPUT instruction.

 

• Normal completion : Off with no change.

 

• Abnormal completion: Turns on at the END

 

processing of the scan where

 

the OUTPUT instruction is

 

completed, and turns off at

 

the next END processing.

[Operation during execution of an OUTPUT instruction]

 

 

 

 

 

 

 

 

 

Sequence

END

 

 

 

END

END

 

END

processing

 

 

 

processing

processing

processing

program

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Execution of OUTPUT

 

 

 

Completion of transmission by

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the OUTPUT instruction

 

 

 

 

 

 

instruction

 

 

 

OUTPUT instruction

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

Completion device

OFF

 

 

 

 

 

 

 

 

Abnormal

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

completion

Status display device

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

at completion

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Normal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

completion

 

 

 

 

 

 

 

 

 

 

 

One scan

 

 

 

 

9 - 6

9 - 6