4 SETTINGS AND PROCEDURES PRIOR TO OPERATION
4.5 Settings for GX Developer
This chapter explains various settings via GX Developer that allow the Q series C24 to perform data communication with external devices.
See Section 3.3.3 of the User's Manual (Application) for how to perform the remote password setting.
4.5.1 I/O assignment settings [Setting purpose]
The I/O assignment settings perform the settings for the types of modules to be mounted on a base unit, the range of input/output signals, and switches of the Q series C24.
[Startup procedure]
[GX Developer] [PLC parameters] | I/O assignment | . |
For screen display, see the GX Developer Operating Manual.
[Setting screen]
[Display description]
Item name | Setting for item | Remarks |
| ||
| Type | Select "intelli." |
|
| |
| Model name | Enter the module model name to be mounted. |
|
| |
|
| (Example: QJ71C24N) | | ||
I/O | Points | Select 32 points. |
|
| |
Start XY | Enter the start I/O signal (Hexadecimal) for the target module. |
|
| ||
assignment |
|
| |||
Switch setting | Set the communication rate, transmission specifications, | See Section 4.5.2. | |||
| |||||
|
| communication protocol, etc. | |||
|
|
|
| ||
| Detailed setting | Select the control PLC of the Q series C24 when a multiple | See QCPU User's Manual | ||
|
| CPU system is employed. | |||
|
| (Multiple CPU System) | |||
Multiple CPU settings | Select when using a multiple CPU system. | ||||
|
| ||||
4 - 12 | 4 - 12 |