Mocomtech CDM-QX Tck= Tck?, Tck#, Tck$, Tck@, Tdi= Tdi?, Tdi# Tdi$, Tdi Tdi@, Tci=, Txc=

CDM-Qx Satellite Modem					Revision 4
Remote Control				MN/CDMQx.IOM
	Command	Arguments for			Response to	Query	Response to
Parameter	(Instruction	Command or	Description of Arguments		Command	(Instruction	query
Type	Code and	Response to			(Target to	Code and	(Target to
	Qualifier)	Query			Controller)	Qualifier)	Controller)
TX Clock	TCK=	1 byte, value 0	Command or Query		TCK=	TCK?	TCK=x
Source		1, 2	TX Clock Source, where:		TCK?		(see description of
			0=Internal		TCK*		arguments)
			1=TX Terrestrial		TCK#
			2=Loop-Timed		TCK$
			3=Ext loop (G.703 interface only)		TCK^
			Example: TCK=0 (Internal)		TCK@
TX Data Invert	TDI=	1 byte, value	Command or Query		TDI=	TDI?	TDI=x
		0,1	Invert Transmit Data		TDI?		(see description of
			0=Normal		TDI*		arguments)
			1=Inverted		TDI#
					TDI$
			Example: TDI=1(Inverted TX Data)		TDI^
					TDI@
Tx Data Clock	TCI=	1 byte, value	Command or Query		TCI=	TCI?	TCI=x
Invert		0,1	Invert Transmit Data Clock		TCI?		(see description of
			0=Normal		TCI*		arguments)
			1=Inverted		TCI#
					TCI$
					TCI^
					TCI@
Tx Common	TXC=	1 byte	Command or Query		TXC=	TXC?	TXC=x
Carrier State			Tx carrier state common to all Tx		TXC?		(see description of
			0=Off		TXC*		arguments)
			1=On		TXC#
					TXC$
					TXC^
					TXC@
TX roll-off	TXA=	1 byte	Command or Query		TXA=	TXA	TXA=x
(alpha) factor			Tx roll-off (alpha) factor		TXA?		(see description of
			0=20%		TXA*		arguments)
			1=35% (default)		TXA#
					TXA$
					TXA^
					TXA@

C-12