Mocomtech CDM-QX operation manual Bulk Commands

CDM-Qx Satellite Modem	Revision 4
Remote Control	MN/CDMQx.IOM

C.5.5	Bulk Commands
		Argument
	Command	s for			Response to	Query		Response to query
Parameter	(Instruction	Command	Description of arguments		Command	(Instruction
								(Target to
Type	Code and	or			(Target to	Code and
								Controller)
	qualifier)	Response			Controller)	Qualifier)
		to Query
Global Configuration	MGC=	138 bytes, with	Command or Query		MGC=	MGC?		MGC=abcdddd.ddddefghhhhh.hhhijkk.klmnop
		numerical entries,	Global Configuration of CDM-QX on a card slot basis if not grouped as a modem or on a modem basis if grouped. If		MGC?			pp.ppqrstuvvvvvvvAAAA.AAAABCDEEEEE.E
			the card is a Tx and ungrouped as modem, the Rx field will be filled with ‘x’, and vice-versa.The format is:					EEFGHIIIJJ.JKLMNOPPPPPPPQRSSSSTUU
		fixed values and			MGC*			UUUUUUUUUUVWXYYYZZZ.ZZZaaabbbbbb
			abcdddd.ddddefghhhhh.hhhijkk.klmnoppp.ppqrstuvvvvvvvAAAA.AAAABCDEEEEE.EEEFGHIIIJJ.JKLMNOPPPPPPP		MGC#
		delimiters						bb
			QRSSSSTUUUUUUUUUUUUVWXYYYZZZ.ZZZaaabbbbbbbb where:		MGC$
			a=Unit Interface Type	same as ITF	MGC^	MGC?n	Where n=0 to 9
			b=T1 Line Build-out	same as LBO				Returns the MGC portion of 1
			c=Unit framing mode	same as FRM				of 10 stored configurations
			dddd.dddd=Tx Frequency	same as TFQ
			e=Tx FEC Type	same as TFT				(see description of arguments)
			f=Tx Modulation Type	same as TMD
			g=Tx FEC Rate	same as TCR
			hhhhh.hhh=Tx Data Rate	same as TDR
			i=Tx Spectrum Inversion	same as TSI
			j=Tx Scrambler State	same as TSC
			kk.k=Tx Power Level	same as TPL
			l=Tx Clock Source	same as TCK
			m=Tx Data Invert	same as TDI
			n=Tx Carrier State	same as TXO
			o=AUPC Enable	same as AUP
			ppp.pp=AUPC Parameter Setup	same as APP
			q=Warm-up Delay	same as WUD
			r=Tx Common Output state	same as TXC
			s=Tx Reed-Solomon (n, k) value	same as TRS
			t=Tx roll-off (alpha) factor	same as TXA
			u=Tx Data Clock Invert	same as TCI
			vvvvvvv=Expansion Bytes
			AAAA.AAAA=RX Frequency	same as RFQ
			B=RX FEC Type	same as RFT
			C=RX Modulation Type	same as RMD
			D=RX FEC Rate	same as RCR
			EEEEE.EEE=RX Data Rate	same as RDR
			F=RX Spectrum Inversion	same as RSI
			G=RX Descrambler State	same as RDS
			H=RX Data Invert	same as RDI
			III=RX Sweep Width	same as RSW
			JJ.J=Eb/No Alarm Point	same as EBA
			K=RX Buffer Clock Source	same as BCS
			L=RX Reed-Solomon (n, k) values	same as RRS
			M= RX Buffer Size	same as RBS
			N=RX Data Clock Invert	same as RCI
			O=Rx roll-off (alpha) factor	same as RXA
			PPPPPPP=Expansion Bytes
			Q=External Reference Bytes	same as ERF
			R=EDMAC Framing Mode	same as EFM
			SSSS=EDMAC Slave Address	same as ESA
			T=Unit Test Mode (Read only)	same as TST
			UUUUUUUUUUUU=Unit Alarm Mask	same as MSK
			V=RTS/CTS Control	same as RTS
			W=Statistics Sampling Interval	same as SSI
			X=CnC Mode	same as CNM
			YYY=CnC Frequency Offset	same as CCF
			ZZZ.ZZZ=CnC Min/Max Search Delay	same as CSD
			aaa=CnC Re-Acquisition time	same as CRA
			bbbbbbbb=Epansion Bytes
			Fill unused expansion bytes with ‘x’

C-40