Mocomtech CDM-QX Rsw= Rsw?, Rsw#, Rsw$ Rsw@, Rbs=, Rbs?, Rbs#, Rbs$, Rbs@, Bcs=, Bcs?

	CDM-Qx Satellite Modem						Revision 4
	Remote Control					MN/CDMQx.IOM
		Command	Arguments for				Response to	Query	Response to
Parameter		(Instruction	Command or		Description of Arguments		Command	(Instruction	query
Type		Code and	Response to				(Target to	Code and	(Target to
		qualifier)	Query				Controller)	Qualifier)	Controller)
RX Demod		RSW=	3 bytes		Command or Query		RSW=	RSW?	RSW=xxx
Acquisition					RX acquisition sweep range of demodulator, in kHz,		RSW?		(see description of
Sweep Width					ranging from 1 to 32 kHz .		RSW*		arguments)
							RSW#
					Example: RSW=009 (9 kHz)		RSW$
							RSW^
							RSW@
RX Buffer Size		RBS=	1 byte, value of		Command or Query		RBS=	RBS?	RBS=x
			0 through 6		RX Buffer size, where:		RBS?		(see description of
					0=Buffer disabled		RBS*		arguments)
					1=± 512 bits		RBS#
					2=± 1024 bits		RBS$
					3=± 2048 bits		RBS^
					4=± 4096 bits		RBS@
					5=± 8192 bits
					6=± 16384 bits
					Example: RBS=0
RX Buffer Clock		BCS	1 byte, value of		Command or Query		BCS=	BCS?	BCS=x
Source			0 through 42		RX buffer clock source, where:		BCS?		(see description of
					0=Internal		BCS*		arguments)
					1=Rx Satellite		BCS#
					2=Tx Terrestrial (grouped as modem only)		BCS$
					3=Insert (D&I++ mode only)		BCS^
					4=External (QDI Interface only)		BCS@
					Note: Rx Satellite is also available in D&I++ mode.
					Rx Satellite and Tx Terrestrial are also available for
					QDI interface type.
RX roll-off		RXA=	1 byte		Command or Query		RXA=	RXA	RXA=x
(alpha) factor					Rx roll-off (alpha) factor		RXA?		(see description of
				0=20%			RXA*		arguments)
					1=35% (default)		RXA#
							RXA$
							RXA^
							RXA@

C-16