Mocomtech CDM-QX Parameter Instruction Type Code Qualifier LNB Power, Control Band Unit Only

CDM-Qx Satellite Modem	Revision 4
Remote Control	MN/CDMQx.IOM

	Command
Parameter	(Instruction
Type	Code and
	qualifier)
BUC Voltage	N/A
(L-Band Unit
only)

Terminal Tx	N/A
Frequency
(L-Band Unit
only)

Arguments

for

Command or Response to Query

4bytes

10bytes

		Response to	Query	Response to query
	Description of arguments	Command	(Instruction
				(Target to
		(Target to	Code and
				Controller)
		Controller)	Qualifier)
Query only		N/A	BDV?	BDV=xx.x
	Indicates the value of the BUC voltage, in the form: xx.x			(see description of
	Where: xx.x is between 0 and 64.0			arguments)
	If not available, response is 00.0
	Example: BDV=43.6 (BUC DC voltage is 43.6 volts)
Query only.		N/A	TTF?	TTF=xxxxx.xxxx
	Terminal Tx Frequency, where frequency = BUC LO ± TFQ			(see description of
	Resolution = 100 Hz			arguments)
	Returns 00000.0000 if BUC LO is zero
	Example: TTF=14250.9872

C.5.7 LNB Commands

	Command
Parameter	(Instruction
Type	Code and
	qualifier)
LNB Power	LPC=
Control
(L-Band Unit
only)

LNB Frequency	LFR=
Reference
Enable
(L-Band Unit
only)

Arguments

for

Command or Response to Query

1 byte, value of 0,1,2

1 byte, value of 0, 1

			Response to	Query		Response to query
	Description of arguments		Command	(Instruction
						(Target to
			(Target to	Code and
						Controller)
			Controller)	Qualifier)
Command or Query		LPC=		LPC?	LPC=x
LNB Power Control, where:		LPC?			(see description of
0=Off		LPC*			arguments)
1=On, 13V LNB Voltage		LPC#
2=On, 18V LNB Voltage		LPC^
Example: LPC=1 (LNB Power is On, 13V)
	Command or Query		LFR=	LFR?	LFR=x
	0=Disable LNB Reference		LFR?			(see description of
	1=Enable LNB Reference		LFR*			arguments)
			LFR#
			LFR^

C-45