Mocomtech CDM-QX operation manual Bad=, Band Unit Only, Arguments For Command or Response to Query

CDM-Qx Satellite Modem	Revision 4
Remote Control	MN/CDMQx.IOM

C.5.6 BUC Commands

Parameter	Command
	(Instruction
Type	Code and
	qualifier)
BUC Address	BAD=
(L-Band Unit
only)

BUC Comms	BCE=
Enable
(L-Band Unit
only)

BUC Power	BPC=
Control
(L-Band Unit
only)
BUC 10 MHz	BFR=
Reference
(L-Band Unit
only)

Arguments

for

Command or Response to Query

2bytes, value of 01 to

1 byte, value of 0,1

1 byte, value of 0,1

1 byte, value of 0,1

Description of arguments	Response to	Query	Response to query
	Command	(Instruction
			(Target to
	(Target to	Code and
			Controller)
	Controller)	Qualifier)
Command or Query	BAD=	BAD?	BAD=xx
Indicates the Block Up Converter (BUC) Address, in the form:	BAD?		(see description of
xx, where xx is between 01 and 15	BAD*		arguments)
	BAD#
Example: BAD=03	BAD^
Note: This command is only valid when the FSK and BUC
power are enabled.
Command or Query	BCE=	BCE?	BCE=x
Enables or disables communications, via the FSK link, with an	BCE?		(see description of
externally connected BUC, where:	BCE*		arguments)
0=Disabled	BCE#
1=Enabled	BCE^
Example: BCE=0 (Disabled)
Command or Query	BPC=	BPC?	BPC=x
0=Disable BUC DC Power	BPC?		(see description of
1=Enable BUC DC Power	BPC*		arguments)
	BPC#
	BPC^
Command or Query	BFR=	BFR?	BFR=x
Enables or disables the 10 MHz frequency reference to the	BFR?		(see description of
BUC.	BFR*		arguments)
0=Disabled	BFR#
1=Enabled	BFR^

C-42