Mocomtech CDM-QX Buc Lo Blo=, Boe= Boe?, Boe#, Bch= Bch?, Bch#, Bcl= Bcl?, Bcl#, Blo#

CDM-Qx Satellite Modem

Remote Control

	Command	Arguments
		for
Parameter	(Instruction
		Command or
Type	Code and
		Response to
	qualifier)
		Query

Revision 4

MN/CDMQx.IOM

	Response to	Query	Response to query
Description of arguments	Command	(Instruction
			(Target to
	(Target to	Code and
			Controller)
	Controller)	Qualifier)

BUC Output	BOE=
Enable
(L-Band Unit
only)

BUC High	BCH=
Current Limit
(L-Band Unit
only)
BUC Low	BCL=
Current Limit
(L-Band Unit
only)
BUC LO	BLO=
Frequency
(L-Band Unit
only)

BUC Output	N/A
Power Level
(L-Band Unit
only)

1 byte, value of 0,1

4bytes

4bytes

6bytes

4 bytes

Command or Query	BOE=	BOE?	BOE=x
Indicates BUC Output enable	BOE?		(see description of
0=Off (Output Disabled)	BOE*		arguments)
1=On(Output Enabled)	BOE#
Example: BOE=1 (BUC Output is Enabled)	BOE^
Note: This command is only valid when the BUC FSK comms
and BUC power are enabled.
Command or Query	BCH=	BCH?	BCH=xxxx
BUC High Current Limit, a value between 500 and 3200 mA	BCH?		(see description of
	BCH*		arguments)
Example: BCH=3100	BCH#
	BCH^
Command or Query	BCL=	BCL?	BCL=xxxx
BUC Low Current Limit, a value between 100 and 3000 mA	BCL?		(see description of
	BCL*		arguments)
Example: BCL=0600	BCL#
	BCL^
Command or Query	BLO=	BLO?	BLO=xxxxxs
BUC transmit LO frequency information in the form: xxxxxs,	BLO?		(see description of
where :	BLO*		arguments)
xxxxx is the LO frequency in the range of 3000 to 65000 MHz	BLO#
All 0’s (000000) disables the feature	BLO^
S is the sign for the mix (+ or – character)
Terminal Frequency= BUC LO TFQ
Example: BLO=12000+ (BUC LO is 12 GHz, low-side mix)
Query only	N/A	BOL?	BOL=xx.x
BUC output power level in the form xxx, where xxx is the value			(see description of
in watts.			arguments)
Example: BOL=08.3 (BUC reports output is 8.3 watts)
Returns 00.0 when FSK and BUC power are not enabled.

C-43