Mocomtech CDM-QX operation manual Dni= Dni? Dni# Dni$ Dni

CDM-Qx Satellite Modem	Revision 4
Remote Control	MN/CDMQx.IOM

C.5.10 Drop & Insert Commands (E1 CCS Only) for D&I++

Parameter	Command
	(Instruction
Type	Code and
	qualifier)

Arguments

for

Command or Response to Query

Description of arguments	Response to	Query	Response to query
	Command	(Instruction
			(Target to
	(Target to	Code and
			Controller)
	Controller)	Qualifier)

Drop & Insert	DNI=
(applies to
cards grouped
as modem)

65 bytes

Command or query. DNI=dddddddddddddddddddddddddddddddtiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiTL

31 bytes of Drop information:

d = 31 bytes defining Timeslot locations (or channels) t = Drop type:

(0=reserved, 1=reserved, 2=E1-CCS, 3=reserved)

31 bytes of Insert information:

I = 31 bytes defining Timeslot locations (or channels) T = Insert type:

(0=reserved, 1=reserved, 2=E1-CCS, 3=reserved)

Timeslot definition:

0 = Unused

1-9 for timeslots 1–9, A=10, B=11, C=12, D=13…V=31.

L= reserved (set to 0)

Example:

123456789ABCDEFGHIJKLMNOPQRSTUV2123456789ABC

DEFGHIJKLMNOPQRSTUV20

Drop channels 1–31 using timeslots 1–31. Same for Insert.

Note: This command is a bit forgiving in the sense that the modem accepts the command even though the interface type is other than G.703. This was intentional because it’s being used with the CRS-300 switch for 1:N redundancy.

DNI=

DNI?

DNI*

DNI# DNI$ DNI^

DNI?

DNI?n

DNI=dddddddddddd dddddddddddddddd dddtiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

TL

(see description of arguments) Returns current D&I configuration.

Where n=0 to 9 returns the DNI portion of 1 of 10 stored configurations.

C-50