Mocomtech CDM-QX operation manual Buc, But?, Bpa?, Bsv?, Bdc?

CDM-Qx Satellite Modem

Remote Control

	Command	Arguments
		for
Parameter	(Instruction
		Command or
Type	Code and
		Response to
	qualifier)
		Query

	Revision 4
	MN/CDMQx.IOM
		Response to	Query	Response to query
Description of arguments		Command	(Instruction
				(Target to
		(Target to	Code and
				Controller)
		Controller)	Qualifier)

BUC	N/A
Temperature
(L-Band Unit
only)

BUC PLL Alarm	N/A
(L-Band Unit
only)

BUC Software	N/A
Version
(L-Band Unit
only)
BUC Current	N/A
(L-Band Unit
only)

4 bytes

1 byte, value of 0,1

3bytes

4bytes

Query only	N/A	BUT?	BUT=sxx
Indicates BUC temperature, in the form: sxxx			(see description or
Where:			arguments)
s=sign (+ or – character)
xx=value
If not available, response is –99
Example: BUT=-13 (BUC temperatures is -13°C)
Note: This query is only valid when the FSK and BUC power
are turned On.
Query only	N/A	BPA?	BPA=x
BUC PLL lock state, where:			(see description of
0=Unlocked			arguments)
1=Locked
Example: BPA=1 (BUC PLL is locked)
Note: This query is only valid when the FSK and BUC power
are turned On
Query only	N/A	BSV?	BSV=x.x
Indicates the BUC software version, in the form: x.x			(see description of
Example: BSV=1.1 (Software version 1.1)			arguments)
Note: This query is only valid when the FSK and BUC power
are turned On
Query only	N/A	BDC?	BDC=xxxx
Indicates the value of the BUC Current, in the form: xxxx,			(see description of
where: xxxx is between 0 and 9999, units MA.			arguments)
If not available, response is 0000
Example: BDC=3100

C-44