Mocomtech CDM-QX operation manual Config„Tx„Pwr„AUPC Target Eb/No, Config„Tx„Pwr„AUPC MAX Range

CDM-Qx Satellite Modem	Revision 5
Front Panel Operation	MN/CDMQx.IOM

(Config„Tx„Pwr„AUPC) – TARGET Eb/No

Remote Demod - Target Eb/No

Min Eb/No:9.9dB (◄ ►, ▲ ▼, ENT)

Edit the target Eb/No of the remote demod, using the ◄ ► and STarrow keys. Default value is 3.0 dB, and upper limit is 9.9 dB. The user should then press ENT.

(Config„Tx„Pwr„AUPC) – MAX RANGE

Maximum-permitted Power increase: 01dB (▲ ▼, ENT)

Edit the maximum permitted increase in power level (when in AUPC mode), using the STarrow keys. Default value is 1dB, and upper limit is 9 dB. Then press ENT.

(Config„Tx„Pwr„AUPC) – ALARM

Action when max Tx Power reached: None TxAlarm (◄ ►,

Select the action that will occur if the AUPC causes the maximum output power level to be reached, either None or TxAlarm. Then press ENT.

(Config„Tx„Pwr„AUPC) – DEMOD-UNLOCK

Action when Remote Demod unlocks: Nom-Pwr Max-Pwr

Select the action that will occur if the remote demod is unlocked. The choices are: Nom- Pwr (Nominal Power), where the output level will revert to the nominal power level set under Manual, or Max-Pwr, (Maximum Power), where the output level will change to the maximum permitted. The user should then press ENT.

5–21