Motorola QIP7000 installation manual Connecting to the ONT

Installation

B

5.If Clr is displayed, press any other key to reset the terminal and turn it off to complete the clearing process.

Connecting to the ONT

	If necessary, connect to the ONT to the home coaxial network. This example shows
	connecting the Motorola ONT1000 model which does not have embedded Multimedia
	over Coax Alliance (MoCA) technology.
CAUTION	Be sure the coaxial cabling on the customer premises is not connected to any digital
	network or satellite dish.
	Determine how to route the coaxial and Ethernet cables from the ONT into the home.
	You may need to move an existing cable drop from its present location to where the
	ONT is mounted.
	To connect to the Motorola ONT1000:
	1.	Open its door.
	2.	Connect the customer’s premises coaxial cable wiring to the CABLE OUT port.
	3.	Connect the customer’s premises Ethernet cabling to the ETHERNET port.
	4.	If necessary, route the coaxial and Ethernet cables into the house.
	5.	Close the ONT door and secure the ONT.

Figure 12 – Connecting to the ONT1000

QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual		18
574702-001 a	This document is uncontrolled pending incorporation in a Motorola CMS