Diagnostics
The Interface Status fields are:
B
Field
1394 I/O Device
USB I/O Device
Ethernet Device
Parallel Port
IR Xmit
Hard Drive Status
Smart Card
HDMI Port
EDID Data
Description
Indicates if enabled; indicates if active.
Indicates if enabled; indicates if active.
Indicates if enabled; indicates if active.
Indicates if enabled; indicates if active.
Indicates if enabled; indicates if active.
Indicates if enabled; indicates if active.
Indicates if enabled; indicates if active.
If a device is connected to the HDMI port only, the following diagnostics display to help troubleshoot the HDMI interface. They all display “N/A” if no device is connected to the HDMI port or the value is invalid or cannot be retrieved.
•Device Connected — indicates whether a device is connected to the HDMI port — Yes or No.
•Repeater — indicates whether the connected device is a repeater — Yes or No.
•Video Xmission (transmission) — Indicates whether the QIP7000 series is transmitting video over the HDMI port — Not Active or Active.
•HDCP Enabled — Indicates whether the QIP7000 series is using HDCP to encrypt video transmitted over the HDMI link — Yes or No. If the Video Xmission status is Not Active, the HDCP Enabled status is No
•Output Format — Indicates the timing format of the video sent through HDMI:
•1920 x 1080i — 1920 pixels wide by 1080 pixels high, interlaced
•1280 x 720p — 1280 pixels wide by 720 pixels high, progressive
•720 x 480p — 720 pixels wide by 480 pixels high, progressive
•720 x 480i — 720 pixels wide by 480 pixels high, interlaced
•640 x 480p — 640 pixels wide by 480 pixels high, progressive
Aspect Ratio — indicates the aspect ratio of the video sent through HDMI — 4:3 or 16:9.
Indicates the video timing formats that were read from the Extended Display Identification Data (EDID) register for the connected device, in particular the detailed timing description blocks. The list displays all of the formats that the QIP7000 series could read, up to a maximum of 12 formats. If the QIP7000 series cannot read any formats, EDID Data is blank. An asterisk (*) after the aspect ratio means the QIP7000 series supports the format. If more than twelve video timing formats are discovered, the supported formats only are listed first, followed by up to twelve remaining formats.
QIP7000 (P2) Series Hybrid QAM/IP HD | 62 | |
This document is uncontrolled pending incorporation in a Motorola CMS |