Diagnostics
The Purchase Status fields are:
B
Field
Unsent
Unack
Last Seq Num
Last RB Time
IPPV Status
Prep CMD
Prep ACK
Poll Request
Poll Acknowledge
Stack Unit
Show Count
Credit Total
Debit Total
Description
The number of purchases in the QIP remaining to be polled. It can be an integer from 0 to 63.
The number of reports that have not been acknowledged by the controller. It is an integer.
The last acknowledged sequence number of a purchase sent by the controller. It is a
The last time the QIP7000 series attempted to report back purchases to the controller, in GPS seconds.
If IPPV is enabled, the IPPV status indicator is on. If IPPV is disabled, the IPPV status indicator is off.
“Last Prepare for Poll Command” sequence number and time of the last prepare for poll request command that was sent by the controller. Note that each requesting process maintains an independent sequence of poll requests to uniquely identify the poll responses.
“Last Prepare for Poll Acknowledge” sequence number and time of the last Report Purchase request sent by the controller.
Sequence number and time of the last send poll buffer command that was sent by the controller.
Sequence number and time of the last Poll Acknowledge message sent by the controller.
Unit used in purchase processing.
Count used in purchase processing.
Credit used for purchase processing.
Debit used for purchase processing.
QIP7000 (P2) Series Hybrid QAM/IP HD | 39 | |
This document is uncontrolled pending incorporation in a Motorola CMS | ||
