Connecting the Home Router | Motorola QIP7000 guide

Installation

B

Connecting Homes with Multiple Existing Cable Drops

Some customer premises may have multiple coaxial inputs from one or more taps, typically entering different locations in the home. For the PON, it is practical to have one connection only per customer premises. You must use a splitter and cabling to connect any additional drops to the ONT. The routing will depend on the layout of the home and customer preference.

Connecting the Home Router

To connect the home router:

Connect the Ethernet cable you routed from the ONT to one of the Ethernet ports on the home router.

Be sure the router is powered on.

Enable Dynamic Host Configuration Protocol (DHCP) on the router. Follow the instructions provided with the router.

Connecting the Home Router - embedded MoCA ONT

To connect the home router:

Connect the coaxial cable you routed from the ONT to the coax/MoCA port on the home router.

Be sure the router is powered on.

Enable Dynamic Host Configuration Protocol (DHCP) on the router. Follow the instructions provided with the router.


QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual		21
574702-001 a	This document is uncontrolled pending incorporation in a Motorola CMS

Image 29

Motorola QIP7000 installation manual Connecting Homes with Multiple Existing Cable Drops, Connecting the Home Router

Contents

QIP7000 P2 Series Page Safety and Compliance During Installation FCC Declaration of Conformity Contents D01 Operational Check for the Remote ControlD02 D03 Figures 1Introduction QIP7232 Front and rear views Tuners Features Standard Data Features Company From USA or Canada Outside USA or Canada Getting HelpCalling for Repairs Label Description Front PanelRear Panel Lable Description Card PON Overview System Overview Service Description Fttp PON carries the following services Whole Home IP Video CPE overview WAN LAN MoCAOOB Multi room DVR network Multi-Room DVR Whole Home IP Video Network Installation Installation Connect to the ONT During the installationBefore You Begin Checking the Home Coaxial Network Topology After you finish connecting the components Marginal MoCA network performance Video Connection OptionsIf you make any changes to the network, repeat steps 1 Connection TV Type Description Connection Type Description Audio Connection OptionsClearing the Hard Drive Connecting to the ONT MoCA technology Connecting to the ONT with embedded MoCA Key Name Description ONT1000M Connections Connecting the Home Router embedded MoCA ONT Connecting Homes with Multiple Existing Cable DropsConnecting the Home Router Determine if you are connecting to a Installation Overview Cabling to an Hdtv Cabling to an Hdtv for Video Cabling to an Hdtv for Audio Cabling to an Hdtv for Audio Cabling to an Hdtv and A/V Receiver for Video Cabling to an Hdtv and A/V Receiver Cabling to a Standard Definition stereo TV Cabling to a Standard-Definition TV Cabling to a Standard Definition TV, A/V Receiver and VCR Cabling to a Standard-Definition TV, A/V Receiver and VCR Port type Description Data Device ConnectionsQIP7000 series front panel provides Optimizing the High-Definition Settings Operational Check for the Remote ControlFeature Testing Procedure Verifying the MoCA Network Setting Description Setting Description Graphics Overlaying the Video Using the Diagnostics 4Diagnostics D01 General Status Example General Status display no error ROM ID General Status fields areField Description D02 Purchase Status Front panel display for Purchase Status diagnostic Field Purchase Status fields are D03 Out-Of-Band OOB Status Front panel display for the OOB diagnostic Out-Of-Band Status fields are Agile OOB Tuner Hunting D04 In-Band Status Front panel display for in-band diagnostic Carrier locked Carrier not locked PCR Lock In-Band Status fields are Front panel display of a unit address D05 Unit Address/Security Unit Address fields are Separable SecurityEMM EMM SCC Sccecm Sign Separable Security fields are D06 Current Channel Status Digital Current Channel status fields are APS CCICIT DRM Ethernet Return front panel display D07 Upstream Status Ethernet Return fields are D08 Code Modules Front panel display for code modules Code Modules fields are Nvram D09 Memory Configuration IEC958PCM D10 Audio/Video StatusAudio Spdif Black Unmuted Field Description D11 Interface/Port Status Page Interface Status fields are D12 User Setting Status Definition 480i format 720 x 480 pixels D13 DVR/Hard Drive Status OSD DVR/Hard Drive Status fields are D14 Application Specific Information D15 Interactive Status UnconfigInteractive Status fields are Macconnect Waitlmack InitwaitdcorcWaitsoack Waitlaorso Connected Home Status fields are This diagnostic displays the MoCA network statusD16 Connected Home Connected Home Link Status fields are TX Data Rate D17 Key Pad / LED Test Problem Possible Solution 5Troubleshooting Problem Possible Solution Off standby Insufficient RF Network Throughput IP Network Issues Bypassing an Amplifier Using a diplexer to bypass a line amplifier