Diagnostics
The Separable Security fields are:
B
Field
CARD Interface
CableCARD ID
Host ID
Data ID
Validation
Pairing Rpt Method
MSO Phone Number
CableCARD
Object Name
Object Ver.
Manufacturer
HW Version
Description
CableCARD Interface is a status indication of the interface between the QIP and CableCARD. It will indicate ‘Good’ if no errors were detected, ‘Error’ if there is a problem detected with establishing the CableCARD interface, or ‘Unsupported CARD’ if the inserted CableCARD is not an
The unique identifier provided by the CableCARD.
The unique identifier in the QIP Device Certificate.
A value generated by the CableCARD for the Pairing report.
•UKNOWN if a Validation message was not received by the product
•VALID or INVALID as set by the Host Validation Message received from the headend
•BINDING if the CableCARD is busy with the binding authentication process
•NOT BOUND if Card validation status in not bound for CableCARD reasons
•HOST CERTIFICATE INVALID if the status is not bound because the Host Certificate was invalid
•HOST SIGN FAILED if status is not bound because of failure to verify Host’s
SIGN
•AUTH KEY FAILED if status is not bound because of failure to match AuthKey from the Host Device
•FAILED if binding failed for other reasons
Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or set to ‘Unknown’ if the headend message was not received.
MSO Phone Number as configured at the headend.
Code object name executing on the CableCARD.
Code object version executing on the CableCARD.
CableCARD manufacturer.
Version number provided by the CableCARD.
QIP7000 (P2) Series Hybrid QAM/IP HD | 47 | |
This document is uncontrolled pending incorporation in a Motorola CMS | ||
