Motorola QIP7000 D16 Connected Home, This diagnostic displays the MoCA network status

Diagnostics

B

d16 Connected Home

This diagnostic displays the MoCA network status:

CONNECTED HOME STATUS

RF Freq: 1150 MHz

MoCA Node/ Set-top	Dev (#Ses)/	MAC/IP
Node	Ver
-/1 M	ETerm (0)	xx:xx:xx:xx:xx:xx
	02.51	169.254.001.xxx
-/2	EHub (2)	xx:xx:xx:xx:xx:xx
	02.51	169.254.001.xxx
-/3	ETerm (1)	xx:xx:xx:xx:xx:xx
	02.51	169.254.001.xxx
-/4	ETerm (0)	xx:xx:xx:xx:xx:xx
	02.51	169.254.001.xxx
3/5	ETerm (0)	xx:xx:xx:xx:xx:xx
	02.51	169.254.001.xxx
0/-	ETerm (0)	xx:xx:xx:xx:xx:xx
	02.51	169.254.001.002

The Connected Home Status fields are:

Field	Description
RF Freq	Displays the frequency of the MoCA RF channel in use by the set-top, in
	MHz, from 1150 to 1500 MHz. The default is 1150 MHz.
Table	Displays data from each detected MoCA set-top:
	•	* — Indicates the set-top on which you are viewing the diagnostic
	•	N — Indicates the MoCA network coordinator.
	•	M — Indicates the master set-top.

The columns are:

•MoCA Node/Set-top Node — Displays the MoCA node ID, which can be 0 to 8.

•Dev — ETerm indicates a media terminal. EHub indicates a media hub.

•(#Ses) — The Number actually shown on the screen is actually the number of sessions on the Hub's hard drive.

a.There is always one session on a working hard drive. This session supports the pause function.

b.There are 0 or 1 additional sessions, depending if the Hub is recording something or not.

c.There is 1 more session if the Hub user is playing back a recorded session on the hub itself.

d.There are 1 or two sessions if terminal(s) are playing MRDRV sessions. Ver — Displays the MoCA software version in xx.yy format (for example, 02.51).

MAC/IP — Displays the MAC address and the link-local IP address 169.254.001.xxx; xxx ranges from 0 to 255.

QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual		70
574702-001 a	This document is uncontrolled pending incorporation in a Motorola CMS