Motorola QIP7000 installation manual Diagnostics, Field, Description, 574702-001 a

Diagnostics

B

Field	Description
			connection to MAC PID Stream.
	I dc	INIT_WAIT_DC_OR_C	The QIP7000 series is in the interactive
			initialization state and waiting for the
			default configuration or the contention
			channel list messages.
	I L	WAIT_LM_ACK	The QIP7000 series is in the interactive
			initialization state and waiting for Link
			Management Response ACK for Local
			Address Message.
	I SO	WAIT_SO_ACK	The QIP7000 series is in the interactive
			initialization state and waiting for a Sign On
			acknowledgement.
	I LA	WAIT_LA_OR_SO	The QIP7000 series is in the interactive
			initialization state and waiting for Logical
			Address or Sign On with verification
			Frequency message.
	S I	INIT_STOPPED	The QIP7000 series is in the interactive
			initialization state and the TransMode has
			stopped.
	r dc	RUN_WAIT_DC_OR_C	The QIP7000 series is in the interactive
			state and waiting for the default
			configuration or the contention channel list
			messages.
	r	RUNNING	Interactive state is running, sending idle
			messages, and waiting for any prepare for
			poll or MAC messages.
	S	RUN_STOPPED	The interactive run state has stopped and
			the QIP7000 series is waiting for status or
			a transmission control message.
	00	INVALID	The interactive state is unknown or invalid.
MAC Abort Cntr	This counter increments every time the MAC layer reaches the cell abort count
	limit. It is reset when the QIP7000 series receives an ACK. If the counter
	reaches the MAC abort count limit, the QIP7000 series assumes the MAC layer
	is unavailable due to noise, congestion, or some other problem. The QIP7000
	series stops transmitting data, reports an error to the calling function, and
	attempts to re-enter the network using the initialization process. 0000 is
	displayed as the default or if the MAC Abort CNTR is not configured or
	unknown.
Socket Port	The socket mode and activity:
State	• UNUSED — The socket is not being used.

•OPENED — The socket is open.

•READY — The socket is ready to send or receive.

•RECEIVING — The socket is receiving data from the application server.

•SENDING — The socket is sending data to the application server.

•UNKNOWN — The socket state is invalid or unknown.

QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual		69
574702-001 a	This document is uncontrolled pending incorporation in a Motorola CMS