[Standard—Nortel Networks Confidential]

Chapter 1 Setting up and initializing your i2004 Internet Telephone 3

aFor a telephone not sharing a LAN access with a PC:

Connect one end of the Ethernet cable to the Ethernet plug (identified with a network icon) on the telephone, and the other end to your 10/ 100-BaseT Ethernet jack.

bFor a telephone sharing a LAN access with a PC:

Complete step a and connect one end of a second Ethernet cable to the PC Ethernet port on the back of the telephone and the other end to the computer’s Ethernet port.

3Plug the AC adapter plug into the base of the telephone.

4Plug the AC adapter into the nearest electrical outlet.

5Connect the base to the telephone set. To do this you must first ensure that your power cable and handset cable are properly fitted into the provided slots.

6Once the power cable and handset cable are secured tightly in place and flush with the bottom of the phone set, take the base and hinge it into the plastic slots at the front of the phone set. Then, press the back of the base into the back of the telephone.

7To lock the base in place, depress the light gray button at the back of the phone set while carefully pressing the base into place. Release the button to lock the base once it is in place.

Tip: If you have trouble locking the base, or if the phone wobbles on your desktop, re-examine the phone’s cables to ensure the cables are not obstructing the base.

i2004 Internet Telephone User Guide

Page 17
Image 17
Nortel Networks i2004 manual Standard-Nortel Networks Confidential