[Standard—Nortel Networks Confidential]

Chapter 3 Configuring the i2004 Internet Telephone 29

Setting IM display

You can choose to block all incoming instant messages so that the text does not appear on the telephone display. The default setting is ON. To change the IM display setting

1Press the Config softkey.

2Highlight the Preferences option and press the Select softkey.

3Highlight the IM Display option and press the Change softkey.

4Press the Ok softkey to change the IM Display option or press the Cancel softkey to exit.

Setting Ignore action

You can set the actions of the Ignore softkey. The Local setting stops an incoming call from ringing on your i2004 Internet Telephone, any other devices defined in your ring list continue to ring for the duration of the ring list before advancing to the next ring list. The Network setting stops the incoming call from ringing on all devices defined in your ring list and forwards the call to the next ring list (if defined). For example, you may set up your ring list sequence to go to your voicemail account.

Tip: For more information about creating a ring list refer to the SIP

Personal Agent User Guide.

1Press the Config softkey.

2Highlight the Preferences option and press the Select softkey.

3Highlight the Ignore Action option and press the Change softkey.

4Press the Ok softkey to change the Ignore Action option or press the Cancel softkey to exit.

i2004 Internet Telephone User Guide

Page 43
Image 43
Nortel Networks i2004 manual Setting IM display, Setting Ignore action