Recommendations and safety | Nortel Networks M760 instruction

	Description

Recommendations and safety
Caution	Do not install the equipment in a damp room or near a water

outlet.

The equipment must be used at a temperature between 5 °C and 45 °C.

Telephone connection

CE marking

Maintenance

This equipement can not be connected to the public network. This equipment is designed to be installed with a private swit- ching system of NORTEL NETWORKS M6500 IP PBX and SUCCESSION CSE 6500 ranges.

The voltage on this network is classed TNV1 (Telephone Net- work Voltage) according to standard EN 60-950.

This certifies the conformity of the equipment with the regulations which apply in accordance with the directive R & TTE 1999/5/EC.

Use a cloth which has been dampened in slightly soapy water, and then wipe with a dry cloth.

Your equipment will retain its new appearance if you do not use any solvents or household cleaning products.

To find out the system's software version

If you are

in any doubt, consult your system operator.

The availability of certain functions described in this guide may depend on the version or configuration of your system. We would advise you to carry out the following test (after connecting the set) to find out the version of the system

to which your set is connected.

- Press the key.

Either the display shows the following:

WHICH DIRECTORY DO YOU WANT TO CONSULT?

Private Abbrev.

Log

Info

-->

The indications and additional features which are highlighted on a blue background are relevant to you in particular.

Otherwise:

DIAL THE ABBREVIATED NUMBER: _ < -Start

The features highlighted on a blue background in this guide are not available with your current system version.

3

Image 11

Nortel Networks M760 manual Recommendations and safety, Telephone connection CE marking Maintenance

Contents

M760 Page Table of contents Table of contents Information directory Multikey function Table of contents Page So… just follow the guide Description Board Accessories for the M760Connections Analog options If you are Any doubt, consult your system operator Recommendations and safetyTelephone connection CE marking Maintenance To find out the systems software version Description of the M760 Loudspeaker key this is used During programming Interactive display Or a record Using the interactive keysUsing the navigator Call by name Using the alphabetical keypadSetting An entry Desired accented character displays Enter textCharacter displays in upper case Display shows the various possibilities for accentuation Answering a call Ending a call Making a call Using the hands free modeDialing methods Dialing methods Number is displayed progressively as you enter it Using the micro-headset modeConversation continues in handsfree mode Conversation continues in micro-headset mode Enabling intercom mode Disabling intercom mode Using the loudspeaker modeUsing the intercom mode Enabling loudspeaker mode Disabling loudspeaker mode Number you dial displays progressively as you enter it Using the prenumbering modeAdjusting listening volume Dial the correspondents number Dialing the number Using the programmable keysDialing a correspondent Dialing a correspondent Calling back An internal number Using the LNR Last Number Redial featureCalling the attendant switchboard operator Calling back a caller Telephone set automatically dials the number Calling an internal or external correspondent by nameCalling a correspondent from the directories by name Display shows the names and associated numbers Searching for a corre- spondent in the shared directoriesSearching for a corre- spondent in the private directory Calling the number Desabling Redial Function Using the automatic redial functionNotifying the correspondent Enabling automatic redial Receiving a call Using the callback later functionAdjusting ring volume Set stores the last setting chosen Diverting a call to another extension Silencing ring toneAnswering a call Dial the extension number Intercepting a call intended for another extensionIntercepting a call dialed to an extension Your group Intercepting a call on general ring Recording the conversation Using the mute featureDuring a call During a call Calling a second correspondent Transferring a call First correspondent is placed on hold Answering a second callDialing a number Dial the number of the second correspondent Terminating Conference call Switching from one correspondent to anotherSetting-up a conference call Releasing one correspondent Protecting the call Other features available during a callUsing the trace function Ascertaining the call duration Press a programmable key Ending a callConsulting the stored numbers Consulting the LNR Last Number Redial calls log LNR calls logLNR calls log Deleting a record from the LNR calls log List will be updated, and the display shows the next recordCalling a correspondent from the LNR calls log Storing the name and/or the number in the private directory Deleting the entire LNR calls log Creating a record in the private directory Accessing the private directoryPrivate directory Private directory Display shows the name saved Modifying or deleting a record from the private directoryDisplay prompts you to enter the associated number Modifying a record Display shows « Directories MANAGEMENT» Customizing labels of private directory listsDeleting a record First record in the list displays Searching by name within the private directorySearching in a list within the private directory You will hear two beeps Display prompts you to select one liste or all lists Calling from the private directoryDeleting all records from the private directory Programming a personal abbreviated number Abbreviated numbers directoriesAbbreviated numbers directories Calling a collective number Modifying or canceling a personal abbreviated numberCanceling an abbreviated number Calling an abbreviated number Consulting the incoming calls log Incoming calls logIncoming calls log Martin Display returns to the incoming calls log record Calling a correspondent from the incoming calls log Display shows the first selection Display will prompt you to enter your passwordDeleting a record from the incoming calls log Deleting all records from the incoming calls log Filling in the information directory Information directoryInformation directory Consulting the information directory You will hear two beeps. The stored record is displayed Display prompts you to enter the number Calling an internal correspondent Internal names listInternal names list Consulting the internal names list Calling an external correspondent External names listExternal names list Consulting the external names list Programming a key Programmable keysProgrammable keys Display prompts you to choose the type of call forwarding Programming a featureDisplay shows the prompt Select a Feature Programming a number Display shows What do YOU Want to SUPERVISE? Programming supervisionProgramming filtering Display prompts you to enter the code Deleting, modifying and exiting programmingProgramming Series of codes Refit the transparent cover in position Identifying programmed keys Choosing a type of forwarding Call forwarding functionCall forwarding function Forwarding your calls Display confirms forwarding of your calls Choosing the forward destinationDisplay shows the forward status Enter the extension number Display shows What do YOU Want to PROGRAM? Canceling call forwardingProgramming call forward on a programmable key Display shows the forwarding details Press the programmed key Overriding the call forwarding functionActivating call forwarding Disabling call forwarding Activating forwarding of calls to the voicemail system Configuring and customizing your voice mailboxVoice mailbox Voice mailbox Consulting messages received Using the programmed key Programming access codes on a programmable key Display shows the message What do YOU Want to SUPERVISE? Multikey functionMultikey function Programming the multikey function Icon associated with this call extinguishes Communicating with the multikey functionAnswering Second call Icon associated with his/her key flashes Multiline function Display shows the programming status of the said key Multiline functionProgramming the multiline function Display confirms the programming of the key Superv Extens Yes More Add Communicating with the multiline function Programming the supervision function Supervision functionSupervision function Calling the supervised extension Communicating with the supervision functionIntercepting a call Transferring Call received to the supervisedextension Programming Filtering function Filtering functionFiltering function Programming the filtering function Calling a filtered set Communicating with the filtering functionDisplay shows the message in step Activating Filtering function Deactivating Filtering function Calling the filtering extensionIntercepting Call made to you Appointment reminder Alarm functionAlarm function Programming the alarm function Changing An appointment Consulting for changing or canceling an appointmentCanceling An appointment Overriding the DND function Using the DND functionDND Do Not Disturb function DND Do Not Disturb function Deactivating the function Programming the DND function on a programmable keyActivating the function Identity presentation* function Other functionsOther functions Replace function Message sent confirmation is displayed Notification functionOut of the office function First of 6 pre-defined messages is displayed You are informed that you will only receive your own calls Data transmission line protection function Locking your set Dial the external access codeLocking the set Locking the set Deactivating set locking Calling an emergency number from a locked set Choosing and setting the current ring SettingsSettings Choosing and setting the set ring Display indicates the contrast setting Setting the display contrastChoosing and setting the priviliged ring Display indicates «PRIVILEGED Ring Volume X» Dial the current password Adjusting the key beep volumeCustomizing the set password Display indicates « PROGRAMMING» Associating a directory with direct keypad callChoosing the display language Choosing the set internal messages lan- guage Display shows the date and time in the selected language Choosing the system message languageChoosing the set and system messages language Display presents the first available languages Programming a micro-headset connection Display indicates 7/Access featuresDisplay indicates the programmed mode handset Display proposes auto or manual headset mode Glossary words to know MiscellaneousMiscellaneous Miscellaneous Date March Published in France