Dialing methods
Switching from handset mode to hands free mode:
If you are using the handset mode:
-Press the 
key and then
6 seconds (while the lamp of the 
key blinks).
The conversation continues in hands free mode. The lamp of the key blinks and will then be illuminated steadily.
When the call is finished, you must press the 
red key to end the call.
Using the micro-headset mode
When a
Answering a call in
Switching from
Switching from
Ending a call:
Making a call:
Your set is programmed in
Note: If your set is programmed in auto headset mode (refer to the section on Settings - Programming a headset connection), you can hold a conversation directly without taking any action.
When the phone rings,
-Press the 
key (or the 
green key). You can converse in 
key lights up.
While holding a conversation in
- Press the 
.
The conversation continues in handsfree mode.
While holding a conversation in
-Another person can lift the handset to supervise the conversation. She can hang up at any time.
The conversation continues in micro-headset mode.
-Press the 
red key.
The call is terminated and the lamp associated with the 
key goes out.
- Dial the desired number directly on the keypad.
The number is displayed progressively as you enter it.
When the called correspondent picks up the receiver, you can hold a conversation in
11
