The supervision function
Beep
10 - Select the signaling mode (such as beep signaling, for example).
You will have a choice between signaling by means of a repeated beep (rep. beep), or ring tone, or no signaling (mute).
Note:
.A customizable key must be programmed for each post supervised.
.A given extension may be supervised by several other extensions.
Communicating with the supervision function
You have programmed the supervision function for one extension on a programmable key. On your set, the status of the icon associated with the key programmed for supervision will vary depending on the status of the extension supervised.
Superv.
Ext. 1
Superv.
Ext. 1
Superv.
Ext. 1
Intercepting a call:
Superv.
Ext. 1
.When the supervised extension is idle, the icon associated with the key will be extinguished.
.When the line of the supervised extension is busy, the icon associated with the key will be illuminated.
.When a call arrives on the supervised extension, the icon associated with the programmed key will flash and, depending on the programming, an audible signal will sound on your set.
Suppose the supervised extension receives a call and you want to intercept the call.
-Press the programmed key.
You can hold a conversation with the call initiator.
The icon associated with the programmed key will extinguish.
Transferring
the call received to the supervisedextension:
Superv.
Ext. 1
Transfer
Calling the supervised extension:
Superv.
Ext. 1
Suppose you are in communication with a correspondent and want to transfer the said correspondent to the supervised extension.
-Press the programmed key and then press the Transfer interactive key.
The icon associated with the programmed key will illuminate.
Suppose you want to call the supervised extension.
-Press the programmed key.
The icon associated with the programmed key will illuminate.
65
