The private directory
List 4
3 - Press the 
key to confirm the name.
The display prompts you to enter the associated number.
4 - Enter the telephone number, including the code for obtaining external line if the number is an external number (up to 23 digits). Note: when a name or number already exists in the directory, the display shows the message "ALREADY REGISTERED".
.If you want to save an access sequence (e.g. secret code or
interrogation code), you must press 
before entering the
code. You must also press 
to insert a pause in this code, if necessary.
.If you make a mistake, press the 
and 
keys to select the character to be replaced (cursor under the character) then enter the new character.
You can also press the Erase interactive key.
5 - Press the 
key to confirm the number.
The display prompts you to choose the list in which to save the record (by default, the list 1 is suggested).
6 - Press eventually the interactive key corresponding to anoth- er list (such as List 4).
7 - Press the 
key to terminate. The display shows the record saved.
Note: use the 
red key to abort or terminate the process.
Modifying or deleting a record from the private directory
Once a record has been created, you can subsequently modify it or delete it.
Modifying a record:
Modify
While consulting the list/record/directory and when the record in question is displayed:
1 - Press the Modify interactive key.
The display prompts you to modify the name and/or number, or to move the record to another list.
Name
2 - Press the interactive key corresponding to the item to be modified (such as the name, for example).
The display shows the name saved.
32
