Settings
Associating a directory with direct keypad call
You can choose the directory associated with the direct keypad call (refer to section on Dia- ling a correspondent from the directories by name).
1 - Press the 
key.
The display shows " 
PROGRAMMING".
Int.Name
2 - Press twice the 
key.
The display indiactes “
DIRECTORIES MANAGEMENT”.
3 - Press the 
key.
The display shows the first selection of «BY DEFAULT SEAR- CH FROM DIR? Private».
4 - Press the interactive key corresponding to the desired list: Private - Int.Name - Ext. Name (Int.Name: for example). Depending on the choice made, the direct call on the keypad is from the private directory or from the shared directory of internal names or from the shared directory of external names.
Choosing the display language
Messages broadcast by the display are from two sources: messages from the set and messages specific to the associated system.
If your set is installed with a recent version system, you have access to only one menu. The language synchronization is supplied automatically by the system.
Otherwise, a specific menu will let you choose the language in which messages from the set are displayed.
Choosing the set internal messages lan- guage:
This setting is used to choose the language in which internal messages of the set are displayed.
1 - Press 
key.
The display indicates « 
PROGRAMMING».
81
