Packard Bell NS1 1HR manual Replacing the optical drive

CHAPTER 3: Replacing notebook components

Replacing the optical drive

Tools you need to complete this task:

Phillips #0 screwdriver Non-marring plastic scribe

Screws removed during this task:

• 1 black M2.5×6 (optical drive)

• 1 black M2×3 (optical drive bracket)

To replace the optical drive:

1Complete the steps in “Preparing the notebook” on page 37.

2Complete the steps in “Removing the battery” on page 38.

3Remove the optical drive screw.

4Use the non-marring plastic scribe to carefully push the optical drive out of the drive bay (1), and then slide the drive out (2).

46