CHAPTER 3: Replacing notebook components
Replacing the palm rest module
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver | or |
Screws removed during this task:
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
9 black M2.5×6 (palm rest - base side)
To replace the palm rest:
1Complete the steps in “Preparing the notebook” on page 37.
2Complete the steps in “Removing the battery” on page 38.
3Complete the steps in “Removing the bay cover” on page 39.
4Remove the hard drive screw, and then remove the hard drive from its compartment.
5If the notebook has a wireless card installed, unplug the antenna cables.
48
