CHAPTER 3: Replacing notebook components
Replacing the antennas
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver | or |
Screws removed during this task:
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
5 black M2×3 (keyboard frame - top base side) - Indicated by A in step 8 of the “Replacing the keyboard” procedure on page 53
•
13 black M2.5×6 (keyboard frame/palm rest module - base side) - indicated by B in step 8 of the “Replacing the keyboard” procedure on page 53
•
1 black M2×3 (system board)
• | 4 black M2.5×6 (LCD panel hinges) |
•
2 black M2.5×5 (LCD front panel)
•
4 chrome M2.5×4 (LCD panel)
To replace the antennas:
1Complete the steps in “Preparing the notebook” on page 37.
2Remove the LCD panel assembly by performing steps 2 – 12 of the “Replacing the LCD panel assembly” procedure on page 76.
3Remove the LCD front panel by performing steps 3 – 5 of the “Replacing the LCD front panel” procedure on page 79.
4Remove the LCD panel by performing steps 4 – 7 of the “Replacing the LCD panel” procedure on page 84.
92
