www.packardbell.com
Replacing the processor
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver |
Additional materials you need to complete this task:
•Soft cloth and isopropyl alcohol; or alcohol pad
•Thermal grease
Screws removed during this task:
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
5 black M2×3 (keyboard frame - top base side) - Indicated by A in step 8 of the “Replacing the keyboard” procedure on page 53
•
13 black M2.5×6 (keyboard frame/palm rest module - base side) - indicated by B in step 8 of the “Replacing the keyboard” procedure on page 53
•
1 black M2×3 (system board)
To replace the processor:
1Complete the steps in “Preparing the notebook” on page 37.
2Remove the system board by performing steps 1 – 15 of the “Replacing the system board” procedure on page 67.
3Remove the cooling assembly by performing steps 4 – 7 of the “Replacing the cooling assembly” procedure on page 70.
4Remove the barcode sticker on top of the processor.
73
