www.packardbell.com
Replacing the wireless card
Tools you need to complete this task:
Phillips #0 screwdriver | |
|
Screws removed during this task:
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (wireless card)
To replace the wireless card:
1Complete the steps in “Preparing the notebook” on page 37.
2Complete the steps in “Removing the bay cover” on page 39.
3Detach the barcode sticker.
4Unplug the antenna cables. Note which color cable corresponds to each of the connectors.
Important
The number of antenna cables varies depending on the type of wireless card installed on the notebook. IEEE 802.11n cards typically have three antenna cables. Other types of wireless cards usually have only two antenna cables.
5Move the antenna cables away from the wireless card screw.
43
