CHAPTER 3: Replacing notebook components
13Position the new LCD panel assembly on the notebook, and then secure it with the hinge screws removed in step 11.
14If the notebook has a wireless card installed, proceed to step 15 to arrange the antenna cables.
15Refer to the antenna cable routing note made on step 9 and secure the antenna cables to the base enclosure before pulling the ends downward to the wireless card compartment.
16Reinstall the system board by performing steps 19 and 20 of the “Replacing the system board” procedure on page 67.
17Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the keyboard” procedure on page 53.
18Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing the palm rest module” procedure on page 48.
19Reinstall the optical drive by performing steps 10 and 11 of the “Replacing the optical drive” procedure on page 46.
20Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the hard drive” procedure on page 41.
21If you have disconnected any wireless antennas, reconnect them now.
22Reinstall the bay cover.
23Reinstall the battery.
78
